John Deere 4052M Compact Utility Tractor

Send An Enquiry







Buy John Deere 4052M Compact Utility Tractor Online. The John Deere 4052M is a 4WD compact utility tractor from the 4M series. This tractor has been manufactured by John Deere in Augusta, Georgia, the USA since 2014. The JD 4052M is equipped with a 2.1 L (127.5 cu·in) four-cylinder diesel engine and one of two transmissions: a power shuttle transmission with wet disc clutch and 12 forward and 12 reverse gears or a hydrostatic transmission with infinite forward and reverse gears.

The John Deere 4052M compact utility tractor used the Yanmar 4TNV86 engine. It is a 2.1 L, 2,089 cm2, (127.5 cu·in) four-cylinder turbocharged diesel engine with 86.0 mm (3.39 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 52.2 PS (38.4 kW; 51.5 HP) at 2,600 rpm of output power.

Make John Deere
Model 4052M
Company country United States
Production years From 2014
Tractor type Compact Utility tractor
Fuel diesel
Price
Total build

Dimensions, weight and tires specs

 

AG front tires 8.00-16
AG rear tires 13.6-28
Lawn front tires 27×10.50-15
Lawn rear tires 44×18-20
Weight 3770 lbs or 1710 kg
Length 130.6 inches [331 cm]
Width
Height 97.4 inches [247 cm]
Wheelbase 73 inches [185 cm]
Ground clearance
Rear tread size 59.9 inches
Front tread size 53.6 inches

Horsepower and engine specs

 

Engine size 127.5 ci or 2.1 L
Number of cylinders 4 cylinders
Horsepower 51.5 hp or 38.4 kW
Power RPM 2600 (rpm)
Engine torque
Engine torque RPM
Fuel type diesel
Fuel tank capacity 13 gal or 49.2 L
Bore stroke 3.39×3.54 inches or (86 x 90 mm)

Battery and electrical specs

 

Number of batteries 1
Battery voltage 12 V
Battery cold cranking Amps 770
Electric ground force negative
Electric charging system alternator
Electric charging Amps 75 amps
Starter motor electric
Engine starter volts 12 V

Clutch and transmission John Deere 4052M Compact Utility Tractor 

 

Transmission system eHydro
Transmission type hydrostatic
Transmission gears infinite forward and reverse
Clutch system wet disc

Mechanical and cab specs

 

Wheel drive 4×4 MFWD 4WD
Final drive system planetary
Steering system power
Braking system hydraulic wet disc
Cabin type Two-post folding ROPS
Differentiel lock mechanical rear

Hydraulic specs

 

Hydraulic system open center
Pump flow rate 10.2 gpm or 38.6 lpm
Steering flow rate 5.7 gpm or 21.6 lpm
Hydraulic pressure 2500 psi or 172.4 bar
Hydraulic max flow 15.9 gpm or 60.2 lpm

Power take-off (PTO) specs

 

PTO claimed power 39.9 hp or 29.8 kW
PTO engine @RPM 540@2400 (rpm)
PTO clutch system
Rear PTO system independent
Rear PTO RPM 540 (rpm)
Front PTO system
PTO fuel consumption

3 point hitch specs

 

Hitch control system position control
Rear hitch I
Rear hitch lift 3130 lbs or 1419 kg

Customer Review

Based on 0 reviews

Add a review

Your email address will not be published. Required fields are marked

Your rating

We Have Recommendations for You